How much does LVP flooring cost in Lexington, KY?
The short answer: in the Lexington, Kentucky area, quality waterproof luxury vinyl plank costs about $2.25 to $3.50 per square foot for materials. Professional installation is roughly $3.00 per square foot for labor, so a typical installed floor lands around $5.25 to $6.50 per square foot. Baseboards, trim, and other finish carpentry are not automatically included and can add additional charges. Doing it yourself drops you back to just the material cost.
LVP price per square foot by tier
| Tier | Material $/sq ft |
|---|---|
| Budget (6-8 mil wear layer) | $1.50 - $2.99 |
| Mid-range (12-20 mil) | $3.00 - $5.00 |
| Premium / commercial (20-28 mil) | $5.00 - $10.00+ |
The single biggest driver of price and lifespan is the wear layer, measured in mils. It is the clear top coat that resists scratches and traffic. A 12-mil floor suits bedrooms and lighter-traffic rooms; 20-mil and up is what you want for kitchens, busy households, pets, and rentals.
What you actually pay in Lexington vs the big box stores
Local pricing varies widely on the exact same spec. For a common 20-mil, 5mm plank, published Lexington-area prices have ranged from about $1.69 per square foot at a local warehouse to $2.58 at Home Depot and $3.89 at Lowe's. Buying distributor-direct is where the savings come from, and it is exactly how we price our catalog.
Installed cost: a 1,000 sq ft example
| Line item | Cost |
|---|---|
| Material (mid-range LVP, ~$2.75/sq ft + 10% waste) | ~$3,025 |
| Labor (~$3.00/sq ft) | ~$3,000 |
| Underlayment + transitions/trim | ~$400 |
| Total installed | ~$6,425 |
Our ~$3.00 per square foot labor figure reflects Kentucky rates, which tend to run below national averages. Baseboards, trim, and other finish carpentry are not automatically included and can add additional charges. Other add-ons that are easy to forget: old-floor removal ($0.50-$2.00/sq ft), subfloor leveling ($0.50-$3.00/sq ft), and stair nosing ($25-$60 per step).
Room-by-room rough estimates (mid-range LVP, installed)
| Room | Approx. size | Installed cost |
|---|---|---|
| Bedroom | 150 sq ft | $790 - $975 |
| Living room | 320 sq ft | $1,680 - $2,080 |
| Kitchen | 200 sq ft | $1,050 - $1,300 |
| Whole main floor | 1,000 sq ft | $5,250 - $6,500 |
Room totals assume no baseboard, trim, or subfloor prep work. See our installation services page or ask us for a firm quote that itemizes any additional charges for your specific project.
How to bring the cost down
- Buy distributor-direct instead of retail markup.
- Install it yourself if you are comfortable with click-lock. It is the single biggest savings lever.
- Buy in the off-season (late December through February) when prices soften.
- Order the right amount the first time using our flooring calculator so you are not paying to ship a second box.
See it before you buy
Schedule a free in-home estimate, then order your whole floor, at distributor-direct prices with free local delivery.
Schedule a free estimateFrequently asked questions
How much does LVP cost per square foot in Lexington?
Material for quality waterproof LVP runs about $2.25 to $3.50 per square foot. Budget lines start near $1.50; premium 20-mil+ lines run $5 and up. Professional installation is roughly $3.00 per square foot for labor; baseboards, trim, and other finish work can add extra charges.
What does it cost to install LVP in a 1,000 sq ft home?
A typical 1,000 sq ft job using mid-range LVP runs roughly $5,250 to $8,000 all-in, depending on wear layer, subfloor prep, and whether baseboards or other trim work are involved.
Is it cheaper to install LVP myself?
Yes. DIY removes the roughly $3.00 per square foot labor cost. On a 500 sq ft project that is around $1,500 saved, more if baseboards or other finish work would otherwise have been needed.
How much extra should I buy for waste?
Add about 10% for a simple rectangular room and up to 15% for rooms with many corners or diagonal layouts.